Vintage Rides. Permanent Vacation.
Out in the Wild Merch on Etsy

Engines of Note · Franco Morini MO1, MO2, M1

Franco Morini MO1, MO2 and M1: the partnership split that put one motor under so many mopeds

Jump to a section
  1. Who were the two partners?
  2. What happened in 1956?
  3. Is Franco Morini the same company as Moto Morini?
  4. One motor, many mopeds
  5. What is inside the MO1, MO2 and M1?
  6. Which mopeds carry them?
  7. How did Morini make a 50 faster?
  8. Sources

In late 1956 two business partners in Bologna fell out, split their company in two and, without quite meaning to, split the Italian moped trade along the same line. One half ran on Minarelli. The other ran on Franco Morini. The MO1, MO2 and M1 are what the second half built.

Blasting 2-Strokes T-Shirt by Moped Motel
Blasting 2-Strokes T-Shirt by Moped Motel. See the T-Shirts.

Who were the two partners?

Vittorio Minarelli was a skilled mechanic and engine expert who had come up through the G.D company. In 1951 he founded FBM, Fabbrica Bolognese Motocicli, to build small engines. Franco Morini, born in 1924, joined as an equal partner. He had trained as a designer at Ducati and at his uncle Alfonso's Moto Morini, and that uncle matters again later. FBM sold a motorcycle called the Gabbiano, shown at the 1952 Milan exhibition, but its future was in engines. In 1954 it brought out a 50 cc two-stroke with two speeds and cable shifting.

What happened in 1956?

Late that year the partners fell out and separated. Minarelli carried on as F.B. Minarelli. Morini set up Morini Franco Motori. The client list divided as neatly as the furniture: Beta went with Morini, and Minarelli took the other bike makers.

Two firms in one city, selling the same kind of engine to the same kind of customer, is usually a recipe for ruin. In Bologna it was a recipe for dominance. By the 1970s the two firms out-earned every other engine maker in the city. Morini's cornerstone was a three-speed 50 cc two-stroke good for 60 km/h, and the customers followed: Aprilia, Malaguti, the Dutch Jamathi and the Mexican ISLO among them.

Is Franco Morini the same company as Moto Morini?

No, and the confusion is the oldest trap in Italian mopeds. Alfonso Morini, a racer and mechanic, founded Moto Morini in 1937. His nephew Franco made engines. A late-1970s American moped sold as the F. Morini, built by Lem around an MO1 engine, belongs to neither company.

The nephew had the last word, though not in person. Franco Morini died in 1984. In 1999 his company bought the Moto Morini name from Ducati and began building large motorcycles under it, fifteen years too late for him to see it. The venture ended in bankruptcy liquidation in 2010, and Eagle Bike bought what was left in 2011.

One motor, many mopeds

A 1979 advertisement in the United States put it plainly: many mopeds, only one motor. Garelli, Malaguti, Fantic, Italjet, Husqvarna, KTM and the Motobecane Sebring all ran Morini power, and so did Aprilia, Beta and Bianchi. That is why the same engine turns up under so many badges.

What is inside the MO1, MO2 and M1?

The MO1 and MO2 are one engine with two different gearboxes. The MO1 has a single overall ratio of 1:6.145 and takes 16 oz of 20W non-detergent oil. The MO2 has two centrifugal clutches with ratios of 1:3.933 and 1:2.36 and takes a pint. The M1 adds a reed valve in the crankcase and takes 12 oz. The MO1 ran roughly 1976 to 1979, the MO2 1977 to 1980 and the M1 1979 to 1985, and every year here is approximate.

The MO1, MO2 and M1 run a 40.4 mm bore and a 39.0 mm stroke for 49.6 cc. Compression is 8:1, the magneto is 23 W and the carburetor is a Dell'Orto SHA 14/12. The premix is 4 oz of two-stroke oil per US gallon, about 1:32; see the premix guide. The MO1 and M1 piston is 40.4 mm with a 40.4 by 1.5 mm ring. Measure the piston before you order rings.

Which mopeds carry them?

Morini MO1, MO2, M1 and M101. A question mark marks an uncertain year.
EngineYearsGearboxCompressionGearbox oil
MO11976-79One-speed automatic8:116 oz 20W non-detergent
MO21977-80Two-speed automatic8:11 pint 20W non-detergent
M11979-85?One-speed automatic, case reed valve8:112 oz 20W non-detergent
M1011981-85?Variator9:1300 cc 10W40 motor oil

The MO, MO1 and MO2 family ran from 1972 to 1979 on some bikes and 1976 to 1980 on others, so check the engine before you assume. Parts catalogs file Morini under Italy, not the USA. See the variator guide for the belt side.

Red 1972 Malaguti Olympique 50 cc moped seen from the left with its engine visible below the tank
A 1972 Malaguti Olympique, 50 cc. Malaguti ran Morini MO engines in the 1970s. The photo shows the whole bike, not the engine. Photo: Chrysler Restorers SA, CC0, Wikimedia Commons.

How did Morini make a 50 faster?

With different engines, not by tuning the MO. The 4MP Export of 1966 to 1968 made 2.0 hp at 6,500 rpm and 60 km/h. The 4MP/S Turbo of 1968 to 1971 made 6 hp at 8,500 rpm, with 9.0:1 compression and a Dell'Orto UA19S carburetor with a 92 jet. The S5R of 1976 to 1980 is 49.6 cc (39.0 by 41.5 mm), 9.0:1 and 5.0 hp, with a SHB 19/19 carburetor and a Bosch magneto. On the bench, count the gearbox oil, look for the reed valve, and measure the piston.

Sources

Next

Find your bike, then pick up something for the garage:

Bikes with this engineMalaguti
Keep goingNext engine: Peugeot 103.

General information from published sources and owner experience. Your bike, your state and your tools may differ, so check your own service manual and local rules. Moped Motel is an independent fan site, not a repair service. No seller, brand or channel mentioned here paid to be included or asked to be, and we have no affiliation with any of them.

More guides are on the Moped Wrench Guides page, with the sources. Want to meet the riders? See Feature Your Bike.

Woody Creek Moped Club T-Shirt by Moped MotelJapanese Moped Long Sleeve by Moped Motel

Vacancy for your closet

T-Shirts, hats, and customs. Checkout happens on Etsy.

Moped Motel is vintage two-stroke moped apparel. We print over 100 moped designs on t-shirts, long sleeves, hoodies, sweatshirts, hats and beanies, inspired by real Puch, Tomos and other classic mopeds. Everything is printed to order, and checkout is on Etsy.

// MOPED ARCADE

Think you know your mopeds?

Name That Moped, Pinball, Blackjack and Stack. Free to play.

Play now
Browse merchBuy on Etsy