// Moped Wrench Guides
Plain-language guides for the garage: tools, big bore kits, tires, buying and selling, no-start diagnosis, premix, carburetors, hauling a bike and more. Written for people who ride vintage mopeds and turn their own wrenches.
Most moped work is metric wrenches, a handful of hex keys and patience. Buy metric only, and buy decent sockets once.
02Paperwork first, engine second, price last. A bike with a bad title is a parts bike at best.
39What Puch Maxi, Newport and Magnum mopeds actually sold for, what each price band buys, and the costs after the sale.
40What makes a moped a moped, the two-stroke engine, the automatic clutch, and how Puch, Derbi, Peugeot and Tomos start.
03A clean title, a bike that starts and honest photos sell a moped faster than a low price does.
04Before you buy parts, work out exactly what you have. On US-model mopeds, the same model came in several speed.
05Vintage moped parts are not at the local auto store. The good news is that a few dedicated shops and communities cover most bikes.
06A moped is easy to learn and easy to underestimate. Spend your first hour somewhere empty and flat, like a parking.
07A moped is the slowest thing on most roads, which makes it easy to forget it is also a motor vehicle. Dress for the.
08There is no single US moped law. Each state writes its own, and the differences are big enough that you must check.
09This is a suggested starting schedule built from the guides in this set. Your owner's manual wins wherever they.
A two-stroke needs three things at the same time: fuel, spark and compression. Check them in that order, and change.
11Most vintage mopeds run a magneto with contact-breaker points, a condenser and an ignition coil. Puch mopeds shipped.
12The plug shows what the cylinder has been doing. It is a clue, not a verdict, but it costs nothing.
13A two-stroke gets its engine oil from the fuel, so the ratio you mix is the only lubrication the top end gets. Too.
14Most vintage moped carbs are Bing, Dellorto or Gurtner, and most of what goes wrong with them is old fuel varnish.
15Before you rebuild the carburetor again, check what is feeding it. Old tanks, petcocks and lines are the quiet cause.
16A two-stroke breathes through the carburetor only. Any other air that gets in leans out the mixture, and a lean.
17A two-stroke breathes through its exhaust, so a blocked or leaking pipe costs power and can hurt the engine.
18A seizure is the piston welding itself to the cylinder wall. It is rarely bad luck. It is almost always something you.
19A moped is a motorized bicycle at heart. The pedals are how you start it, and they are also why the bike is legally a.
Sizing. Check the sidewall before you order anything. Most Puch Maxi models run a 17 inch wheel with a 2.25 x 17.
23A wobbling wheel is a safety problem, not a cosmetic one. Most of it is loose spokes and worn bearings, and both are.
24Most vintage mopeds have cable-operated drum brakes. They are simple, but they stop badly when the cable is dry, the.
25The drivetrain turns engine speed into road speed, and worn parts steal power before they fail.
26Steering and suspension are the parts you only notice when they go wrong. Spend an hour on them before you chase.
27Moped electrics are simple, and most faults are a bad ground, a burned bulb or a loose connector.
Two-stroke engines are sensitive to old gas, so storage is mostly about the fuel system. Do it right in the fall and.
29A moped is light, about 99 lb dry for a Honda Hobbit, so moving one is mostly about the right ramp, the right straps.
30A moped is light enough to lift into a van, which makes locking it down more than a formality. No lock stops a.
What the Piaggio Ciao drive is, how the belt and clutch differ between models, and the steps to replace a clutch on a Ciao without a...
32How to tell a 1977-80 spring-start Honda Express from a 1981 kick-start, and what changed in the ignition, choke, drive and oil system...
33How to tell the 101, 102, 103 and 104 apart, what LVS, SP, SPB, SPR and MVL mean, and how the U1, U2 and U3 codes on the frame tag change the...
34How to tell a PA50I from a PA50II by paint, frame number, carb jet, reed and pipe, and what changed from points to CDI in 1981.
35The variator, intake, swing arm and pulley differences, the US 102 models, the French versions, and which parts cross over.
36How to tell the Ciao versions apart by rack, saddle and variator, the figures they share and the Si and Bravo lookalikes.
37How to tell an S 50 from an S 51, what the N, B, E and C letters mean, and the model years for the bird series.
38How to tell a US Garelli by engine, frame number prefix and model year, and what the Monza GT really is.
39Free printable one-page reference: premix ratios, spark plug gap, torque specs, a 5-minute won't-start check and storage checklists. PDF download.
40Pick a ratio and the gas amount, get the 2-stroke oil to add in ounces and ml.
Looking for the bikes themselves? Read Bike histories or browse the Moped Library.
Added guides
More guides
General information from published sources and owner experience. Your bike, your state and your tools may differ, so check your own service manual and local rules. Moped Motel is an independent fan site, not a repair service. No seller, brand or channel mentioned here paid to be included or asked to be, and we have no affiliation with any of them.

T-Shirts, hats, and customs. Checkout happens on Etsy.
Moped Motel is vintage two-stroke moped apparel. We print over 100 moped designs on t-shirts, long sleeves, hoodies, sweatshirts, hats and beanies, inspired by real Puch, Tomos and other classic mopeds. Everything is printed to order, and checkout is on Etsy.