Moped Wrench Guides · Printable reference
One page of the numbers you look up over and over on a two-stroke moped: premix ratios, spark plug gap and heat range, common torque and fluid specs, a five-minute diagnostic for a moped that won't start, and break-in and winter storage checklists. Free to download and print for the garage wall.
Download the cheat sheet (PDF, free)

Read this first. These are common reference values. Specs change with engine, year and kit, so check your own service manual before you torque or mix anything. Free manuals are on the free moped manuals page.
| Ratio | 1 US gallon | 2.5 gallons | 5 gallons | Best engine use |
|---|---|---|---|---|
| 50:1 (2.0%) | 2.6 oz (76 ml) | 6.4 oz | 12.8 oz | Stock 50cc and synthetic oil |
| 40:1 (2.5%) | 3.2 oz (95 ml) | 8.0 oz | 16.0 oz | 70cc kits and high RPM |
| 32:1 (3.1%) | 4.0 oz (118 ml) | 10.0 oz | 20.0 oz | Break-in and bushing rods |
Mixing rule. Pour half the gas into the can first, add the 2-stroke oil, shake the can, then top off with gas. Never pour oil directly into the moped's gas tank. More on this in the premix guide.
| Item | Spec |
|---|---|
| Standard plug gap | 0.020 to 0.024 in (0.5 to 0.6 mm) |
| Points gap (ignition) | 0.014 to 0.016 in (0.35 to 0.40 mm) |
| NGK B6HS | Stock 50cc and cool weather |
| NGK B7HS | Mild tuning and warm weather |
| NGK B8HS | 70cc big bore kits and high heat |
Reading the plug. White means lean. Tan or brown means the mixture is dialed. Wet black means rich. The guide to reading a spark plug shows what each one looks like.
| Component or fastener | Puch E50 / ZA50 | Tomos A35 / A55 | Honda Hobbit PA50 | Motobecane AV7 / AV10 |
|---|---|---|---|---|
| Cylinder head nuts | 8 to 10 ft-lbs (cross pattern) | 8 to 10 ft-lbs (cross pattern) | 7 to 9 ft-lbs (cross pattern) | 8 to 10 ft-lbs (cross pattern) |
| Spark plug | 15 to 18 ft-lbs | 15 to 18 ft-lbs | 14 to 17 ft-lbs | 15 to 18 ft-lbs |
| Flywheel / magneto nut | 25 to 30 ft-lbs | 25 to 30 ft-lbs | 22 to 26 ft-lbs | About 25 ft-lbs (left-hand thread) |
| Transmission / gear oil | ATF Type F (about 200 to 250 ml) | ATF Type F (about 220 ml) | 10W-30 / 80W-90 (about 90 ml) | N/A (dry belt drive) |
The full walkthrough is in It won't start: the three-check diagnosis.
More in how to winterize a moped and wake it up in spring.
What premix ratio should I use in a stock 50cc moped? The sheet lists 50:1 for a stock 50cc with synthetic oil, which is 2.6 oz of oil per US gallon. Use 40:1 for 70cc kits and high RPM, and 32:1 for break-in. Check your own manual first.
What spark plug gap does a moped use? The sheet lists 0.020 to 0.024 in (0.5 to 0.6 mm), and 0.014 to 0.016 in (0.35 to 0.40 mm) for the points gap.
My moped won't start. What do I check first? Kill switch and petcock, then spark, then fuel delivery, then air leaks.
Related: Premix: fuel and oil ratios, Reading a spark plug, It won't start, Winterizing a moped, Engines of Note, Free moped manuals.
If the cheat sheet saved you a trip to the manual, see the T-Shirts, or find Moped Motel on Etsy.
General information from published sources and owner experience. Your bike, your state and your tools may differ, so check your own service manual and local rules. Moped Motel is an independent fan site, not a repair service. No seller, brand or channel mentioned here paid to be included or asked to be, and we have no affiliation with any of them.
All guides are on the Moped Wrench Guides page, with the sources. Want to meet the bikes first? Read Bike histories.

T-Shirts, hats, and customs. Checkout happens on Etsy.
Moped Motel is vintage two-stroke moped apparel. We print over 100 moped designs on t-shirts, long sleeves, hoodies, sweatshirts, hats and beanies, inspired by real Puch, Tomos and other classic mopeds. Everything is printed to order, and checkout is on Etsy.
// MOPED ARCADE
Name That Moped, Pinball, Blackjack and Stack. Free to play.
Play now