Vintage Rides. Permanent Vacation.
Out in the Wild Merch on Etsy

Engines of Note · Minarelli V1

Minarelli V1: how a bicycle maker's son carried Sachs know-how to Bologna

Jump to a section
  1. Who was Erio Testi?
  2. How did a two-man firm become a factory?
  3. How did the V1 reach America?
  4. What did Minarelli keep changing?
  5. How much power did it make?
  6. Which V1 is which?
  7. What happened to Minarelli?
  8. Sources

In 1953 an Italian bicycle maker sent his son to Austria to find out how small two-stroke engines were made. The son came home and passed it all to a friend, and that friend's company went on to build the V1, the engine under a long roll call of American mopeds.

Motron Full Graphic T-Shirt by Moped Motel
Motron Full Graphic T-Shirt by Moped Motel. See the T-Shirts.

Who was Erio Testi?

Testi was a bicycle company founded in 1933 by Umberto Testi. In 1953 Umberto sent his son Erio to Austria, to Fichtel and Sachs, to learn how small two-stroke engines were built. Erio came back and joined FBM, the Bologna engine firm of Vittorio Minarelli and Franco Morini, and handed Minarelli the Sachs moped engine know-how. That is the reason Morini, Minarelli and Sachs pistons share dimensions to this day.

How did a two-man firm become a factory?

The first result was the P-48 of 1954, a 50 cc two-stroke with two speeds and cable shifting, which later grew into the three-speed P3. In 1956 FBM split in two. Minarelli kept F.B. Minarelli, switched to two-strokes only and set up with 20 technical staff turning out 70 engines a day. In 1967 the firm became Motori Minarelli and moved about five miles north to a new plant at Calderara di Reno. By the 1970s it was building 250,000 engines a year.

How did the V1 reach America?

The V1 family began in 1969, and it crossed the Atlantic under a long list of names: Cimatti, Gitane, Testi, Concord, Motron, Fantic, General, AMF, Baretta, Gadabout, Motomarina and Safari. Mexico took a licence. Acer Mex built the Carabela in Naucalpan, remakes of the early 1970s V1, as a 49 cc pedal model and a 60 cc kick-start model with the tank on top.

The original V1 and V1N ran from 1969 to 1977, and a version with a plastic fan shroud followed to 1980. The kick-start V1-KS ran from 1973 to 1980, and the 1978 owner's manual covered six versions, each with pedals or kick start.

What did Minarelli keep changing?

The first V1 had an iron cylinder, a metal fan shroud and exposed fan blades that could snap off if the cover was pushed in. The aluminium V1A, from about 1977, dropped the fan altogether. The V1P swapped the piston pin bushing for a needle bearing, which made it tolerant of oil starvation. The V1L added a crankcase reed valve and with it more torque off the line. The last of the family, the V1HLE, gained electric start and went onto three-wheelers. The verdict that stuck to it is simple: well made, runs well and easy to work on.

How much power did it make?

US-market V1s were listed at 1.0, 1.5 and 2.0 hp, and the front sprocket set the speed: a 9-tooth went with 1 hp and 20 mph, a 10-tooth with 25 or 30 mph, and an 11-tooth with 2 hp and 30 mph. The V1P grew the intake flange from 12.5 to 14.0 mm and gave the clutch cover a blank sticker area, so brands such as Fantic could put their own name on it.

Which V1 is which?

The fan cover and the cylinder sort the early engines. The reed valve and the aluminium cylinder sort the late ones. The table below runs the whole family.

Minarelli V1 variants.
VariantYearsCylinderCooling
V1, V1N1969 to 1977IronFan, metal shroud
V11977 to 1980IronFan, plastic shroud
V1A1977 to 1980?AluminumNo fan
V1P1979 to 1986IronFan, black shroud
V1H1982 to 1987Sleeved aluminumNo fan
V1L1987 to 1990IronFan, case reed
V1HL1988 to 1990Aluminum, iron coreNo fan, case reed
Cimatti Mini Chic 50 moped, registered 1972
A Cimatti Mini Chic 50, registered 1972. Cimatti is one of the brands that used the V1. The photo shows the whole bike, not the engine. Photo: Baby Cucciola, CC BY 3.0, via Wikimedia Commons.

What happened to Minarelli?

Yamaha began a business relationship with the company in 1990. In 2002 Minarelli became part of the Yamaha Group, and in 2020 Fantic Motor, a name already on the V1 list, bought all of it from Yamaha.

Sources

Next

Find your bike, then pick up something for the garage wall or the rider.

Bikes with this engineMotron, Motron Fairway history
Keep goingNext engine: Piaggio Ciao.

General information from published sources and owner experience. Your bike, your state and your tools may differ, so check your own service manual and local rules. Moped Motel is an independent fan site, not a repair service. No seller, brand or channel mentioned here paid to be included or asked to be, and we have no affiliation with any of them.

More guides are on the Moped Wrench Guides page, with the sources. Want to meet the riders? See Feature Your Bike.

Woody Creek Moped Club T-Shirt by Moped MotelJapanese Moped Long Sleeve by Moped Motel

Vacancy for your closet

T-Shirts, hats, and customs. Checkout happens on Etsy.

Moped Motel is vintage two-stroke moped apparel. We print over 100 moped designs on t-shirts, long sleeves, hoodies, sweatshirts, hats and beanies, inspired by real Puch, Tomos and other classic mopeds. Everything is printed to order, and checkout is on Etsy.

// MOPED ARCADE

Think you know your mopeds?

Name That Moped, Pinball, Blackjack and Stack. Free to play.

Play now
Browse merchBuy on Etsy