Moped Wrench Guides · Guide 15 of 30

Before you rebuild the carburetor again, check what is feeding it. Old tanks, petcocks and lines are the quiet cause of many no-start and lean-running bikes.
Petcock. The fuel valve clogs with old gas gunk and the screen jams. One rebuild showed a quarter inch of old gas gunk inside the valve. Often you can remove it, take it apart, clean the passages and polish the sealing face, and it works again. A rebuild kit or a replacement petcock is cheap insurance. After you reassemble it, it should not leak with the lever in the off position.
Fuel line and filter. Replace brittle, cracked or hard lines. Check for kinks. Fit a small inline filter on the way to the carb. A line that has swollen on the inside can restrict flow even if it looks fine.
Rust in the tank. A rusty tank contaminates fuel and clogs the carb jets, and it will keep clogging until it is cleaned. A common method:
Other notes
General information from published sources and owner experience. Your bike, your state and your tools may differ, so check your own service manual and local rules. Moped Motel is an independent fan site, not a repair service. No seller, brand or channel mentioned here paid to be included or asked to be, and we have no affiliation with any of them.
All guides are on the Moped Wrench Guides page, with the sources. Want to meet the bikes first? Read Bike histories.

T-Shirts, hats, and customs. Checkout happens on Etsy.
Moped Motel is vintage two-stroke moped apparel. We print over 100 moped designs on t-shirts, long sleeves, hoodies, sweatshirts, hats and beanies, inspired by real Puch, Tomos and other classic mopeds. Everything is printed to order, and checkout is on Etsy.
// MOPED ARCADE
Name That Moped, Pinball, Blackjack and Stack. Free to play.
Play now