Moped Wrench Guides · Guide 30 of 30
· Updated Nov 20, 2026
Short answer: Most mopeds are stolen by being lifted into a van or by breaking the steering lock and wheeling the bike away, and it takes seconds. Chain the frame to something fixed, add a disc or grip lock, keep the chain off the ground, fit a hidden kill switch and put a cover on the bike.

A moped is light enough to lift into a van, which makes locking it down more than a formality. No lock stops a determined thief. The goal is to make your bike slower and riskier to steal than the next one.
Most moped theft is not clever. A moped weighs little, and the same handful of methods turn up again and again.
The methods are the same on a Honda Express or a Puch Maxi in the US as on a scooter in London. Your best defence is the same everywhere: make the bike slower and louder to steal than the one next to it.
Lock, chain, cover. The same rules cover mopeds, scooters and motorcycles.
Layer the locks. Use more than one type, like a chain and a wheel lock. Thieves are deterred by anything that adds time and noise.
| How it is stolen | What stops it |
|---|---|
| Lifted into a van | Chain the frame to a fixed anchor so the bike cannot be carried off. |
| Steering lock forced, bike wheeled away | Add a disc lock or grip lock. A steering lock alone does not hold. |
| Chain cut against the ground | Keep the chain taut and off the pavement so the thief has no leverage. |
| Stolen for parts | A cover hides the make and model, and marking the bike makes it traceable. |
A lock slows a thief down. A kill switch stops the bike running even after the lock is beaten. Vintage mopeds have simple ignition wiring, so a hidden toggle in the ignition circuit is a small job. Mount it where a thief will not look, and flip it every time you park. A loud alarm does the other half of the work, because noise draws attention to whoever is standing over the bike.
Chain the rear wheel and the frame to something that cannot move, not just the front wheel. A chain on the rear wheel stops the bike being lifted into a van, and a ground anchor with a lock and chain is the strongest setup at home, especially in a garage.
Mark the bike. Stamp or engrave parts with the frame number or another ID so a recovered part can be traced back to you. Ask your insurer before you buy a lock, because some insurers discount approved locks and security devices.
Buying used? Check the VIN against the title and, where you can, run it through a stolen-vehicle check before you pay. A bill of sale protects you if anyone later claims the bike was stolen.
Most are lifted into a van, or the thief breaks the steering lock and wheels the bike away. It takes seconds. Bikes are also cut free from chains that rest on the ground and stolen for parts.
No. Thieves force the handlebars to break it and roll the bike off. A steering lock is a speed bump, not a lock.
Use more than one kind of lock: lock, chain and cover. Put a disc lock or grip lock on the controls, chain the frame to a fixed anchor, keep the chain taut and off the pavement, and cover the bike.
Yes. A cover hides the make and model, which makes the bike less attractive to a thief.
A tracker improves the chance of getting the bike back after a theft.
Yes. A hidden kill switch in the ignition circuit stops the bike being started and ridden away even if a thief gets past the lock.
Chain the rear wheel and the frame to an immovable object such as a lamp post or ground anchor. A lock through one wheel does not stop a lift.
Record the frame and engine numbers, photograph the bike from every side, mark parts with the frame number or another ID, and hide a tracker on the bike.
Related: how to buy a moped and what vintage mopeds really sell for.
General information from published sources and owner experience. Your bike, your state and your tools may differ, so check your own service manual and local rules. Moped Motel is an independent fan site, not a repair service. No seller, brand or channel mentioned here paid to be included or asked to be, and we have no affiliation with any of them.
All guides are on the Moped Wrench Guides page, with the sources. Want to meet the bikes first? Read Bike histories.

T-Shirts, hats, and customs. Checkout happens on Etsy.
Moped Motel is vintage two-stroke moped apparel. We print over 100 moped designs on t-shirts, long sleeves, hoodies, sweatshirts, hats and beanies, inspired by real Puch, Tomos and other classic mopeds. Everything is printed to order, and checkout is on Etsy.
// MOPED ARCADE
Name That Moped, Pinball, Blackjack and Stack. Free to play.
Play now