Most vintage mopeds have cable-operated drum brakes. They are simple, but they stop badly when the cable is dry, the shoes are glazed or oil gets in the drum.
A drum brake hub and shoes laid out. Photo: Wikimedia Commons contributor, CC BY-SA 3.0, via Wikimedia Commons.
Cables
Lubricate every control cable on a regular schedule with a cable lube. A cable should move smoothly in its housing, with no kinks.
A seized, frayed or broken cable gets replaced. Loosen the adjuster, undo the cable ends at the lever and the drum, and fit the new one. It is an easy job.
If a cable is only frayed at one end, a cable clamp can repair it.
Adjusting free play
There is an adjuster barrel at the lever, and sometimes at the drum as well. Turn it to reduce slack.
Set free play so the lever pulls firmly before it reaches the grip. One service guide for a Suzuki moped puts the engaged rear lever about 0.8 to 1.0 inch from the bar; use that as a rough guide, not a spec for your bike.
Make sure the wheel does not drag when the lever is released.
Shoes and drums
Spray the drum with brake cleaner. Oil in the drum is cleaned with brake cleaner and acetone.
Check the shoes for cracks and wear to the base. If the shoes only have grooves, you can flip them by swapping left and right to get fresh contact.
The 80 x 18 mm shoe is a common Leleu-type fit across the Peugeot 103, Puch Maxi, MBK 51 and Motobecane AV88. New shoes are slightly thicker, so recheck the cable tension after fitting them.
Put a light film of silicone or high-temperature grease on the pivot pins and cam, never on the lining or the drum.
Measure the drum inside diameter at several places. If it is beyond the service limit, replace the drum.
Test before you ride. Check left and right brakes engage evenly, and test the brakes at walking speed before you go anywhere fast.
Outside videos by other people. Not ours, not endorsed, and methods vary. Check against your service manual.
General information from published sources and owner experience. Your bike, your state and your tools may differ, so check your own service manual and local rules. Moped Motel is an independent fan site, not a repair service. No seller, brand or channel mentioned here paid to be included or asked to be, and we have no affiliation with any of them.
Moped Motel is vintage two-stroke moped apparel. We print over 100 moped designs on t-shirts, long sleeves, hoodies, sweatshirts, hats and beanies, inspired by real Puch, Tomos and other classic mopeds. Everything is printed to order, and checkout is on Etsy.
// MOPED ARCADE
Think you know your mopeds?
Name That Moped, Pinball, Blackjack and Stack. Free to play.