Moped Wrench Guides · Guide 23 of 30

A wobbling wheel is a safety problem, not a cosmetic one. Most of it is loose spokes and worn bearings, and both are fixable at home.

What you are working with. A Puch Maxi spoked wheel is 17 inch with 36 spoke holes, 2.9 mm spokes and 4 mm nipples. Spokes are specific to the rim and hub, so match them to the wheel and not just the bike. Cast wheels have no spokes but still use bearings.
Spoke check
Tightening and truing
Replacing a broken spoke. The nipple is inside the rim, so the tire, tube and rim tape have to come off. Often only the spoke needs replacing, not the wheel. Fit the new spoke following the pattern of its neighbors, then true the wheel.
Wheel bearings. Lift the wheel and rock it on the axle. Any play, grinding or roughness means new bearings. Pack with fresh grease and keep dust seals in place. Do the brake service at the same time, since the drum is open anyway.
When to replace the rim. If the tension will not even out, or the rim is dented, cracked or rusted through, a new rim or wheel is cheaper than chasing it. Always check the rim tape and spoke ends before you mount a tube.
General information from published sources and owner experience. Your bike, your state and your tools may differ, so check your own service manual and local rules. Moped Motel is an independent fan site, not a repair service. No seller, brand or channel mentioned here paid to be included or asked to be, and we have no affiliation with any of them.
All guides are on the Moped Wrench Guides page, with the sources. Want to meet the bikes first? Read Bike histories.

T-Shirts, hats, and customs. Checkout happens on Etsy.
Moped Motel is vintage two-stroke moped apparel. We print over 100 moped designs on t-shirts, long sleeves, hoodies, sweatshirts, hats and beanies, inspired by real Puch, Tomos and other classic mopeds. Everything is printed to order, and checkout is on Etsy.
// MOPED ARCADE
Name That Moped, Pinball, Blackjack and Stack. Free to play.
Play now