Moped Wrench Guides · Peugeot 102
The Peugeot 102 and the 103 share a name family, a frame tag behind the headlight and a lot of the same chrome, so it is easy to order a part for the wrong one. The short version: the 102 has no variator and a piston port engine, while the 103 is the variator bike with a reed valve in the case. Almost everything else on this page follows from those two facts.


| Peugeot 102 | Peugeot 103 | |
|---|---|---|
| Drive | Automatic clutch and a fixed pulley, no variator | Variator on most versions; the L2 and LS have none |
| Intake | Piston port | Reed valve in the case |
| Rear swing arm | Starts behind the pulley | Runs the full length of the frame |
| Rear pulley | Same 7 inch pulley on every 102 | Same 8 inch pulley on every 103 |
| Rear sprocket hub | Smaller centre hole | Larger centre hole |
| Where US buyers found them | Department stores such as Montgomery Wards | Peugeot moped dealers |
The swing arm, the pulley and the intake are the checks that do not depend on a paint code or a badge. The 102 has no variator, and the swing arm and intake differ too. The French 102 is described the same way: an automatic disc clutch, no speed variator, a belt to the pulley plate and a chain to the rear wheel.
US-market 102s came in a short list: the SP with a solo seat, the SPB with a long seat, and the TSM with a top tank tube frame. The seat is the only difference between the SP and SPB, and neither came with a speedometer. The SP and SPB have spoke wheels, and the SPB wheels are long spoke.
The French list is much longer, and it explains the odd 102s that turn up in Europe: the R, T, MR, MT, MS, KR, KT, KSM, S, NMR, NMT, City and Twenty versions, separated mostly by where the tank sits and what size the wheels are.
| French version | What sets it apart (French Wikipedia) |
|---|---|
| R | Tank in the front beam, 19 inch wheels, rigid fork, rim brake at the front, drum at the rear |
| T | Improved R with a telescopic fork and a front drum brake |
| MR, MT, MS | Flat beam with the tank under the saddle, 16 inch wheels |
| KR, KT | 1974 versions on 17 inch wheels |
| KSM SP | 17 inch wheels, bulky fork fairing |
| NMR, NMT | The Mini 102, 14 inch wheels |
| Twenty | 15 inch tires |
Both bikes carry an ID plate on the frame behind the headlight. It might read something like 103LVS U3, 102SP U2 or 103MVL, with the speed code after the model. So a plate that reads 102SP U2 tells you the model, the version and the speed class in one line.
The codes are U1 at 20 mph and 1.0 hp, U2 at 25 mph and 1.5 hp, and U3 at 30 mph and 2.0 hp, built so one bike could be sold under different state speed rules. The limits were state by state, with California mopeds going 30 mph and Nevada or Arizona mopeds 25 mph.
On the 102 the difference is small. The only difference between a U2 and a U3 is the intake manifold, and the U2 and U3 cylinders are the same. Some U2 setups run an 8.5 intake and U3 setups 12, so the step up is from an 8.5 to a 12 mm carburetor. The 103 is more involved: the U1 and U2 cylinder has a slightly smaller exhaust port than the U3, and the variator weights differ between U2 and U3.
| Part | What the sources say |
|---|---|
| Front pulley | Same on every 102 and on 103s without a variator |
| Variator weights | 103 variator bikes only, U2 weights or U3 weights |
| Rear pulley | 7 inch on the 102, 8 inch on the 103 |
| Front sprocket | 11 teeth on all Peugeots |
| Rear sprocket bolts | Both use a special 5 hole pattern that is unique to Peugeot |
| Rear sprocket centre hole | Smaller on the 102 than on the 103 |
| Gearing | A 102 rear sprocket must be bigger by 8 over 7 to match a 103 overall |
| Typical rear sprockets | 102: 11x50T and 11x42T. 103 without variator: 11x48T, 40T and 36T. 103 with variator: 11x52T and 56T |
103 rear sprockets can swap with Puch or Motobecane ones apart from the bolt holes, and a 6 hole Puch 45 tooth sprocket can be drilled to fit a Peugeot. If you are chasing gearing, our chain, sprockets and variators guide covers the general ground.
Because it was sold differently. 102s went through Montgomery Wards department stores rather than through Peugeot moped dealers, and department stores could not sell 103s while dealers could not sell 102s. In 1981 a Peugeot 103 cost $599 at Royal Cyclery while a Montgomery Wards banner read mopeds from $279. Peugeot stopped selling mopeds in the USA around 1984 or 1985, and 1980 stock was held back and sold through 1981 to 1983 to get around the 17 digit VIN and noise label rules.
Check the plate, the manual and the part itself before you order.
More on these bikes and what to wear while you work on them:
General information from published sources and owner experience. Your bike, your state and your tools may differ, so check your own service manual and local rules. Moped Motel is an independent fan site, not a repair service. No seller, brand or channel mentioned here paid to be included or asked to be, and we have no affiliation with any of them.
More guides are on the Moped Wrench Guides page, with the sources. Want to meet the riders? See Feature Your Bike.

T-Shirts, hats, and customs. Checkout happens on Etsy.
Moped Motel is vintage two-stroke moped apparel. We print over 100 moped designs on t-shirts, long sleeves, hoodies, sweatshirts, hats and beanies, inspired by real Puch, Tomos and other classic mopeds. Everything is printed to order, and checkout is on Etsy.
// MOPED ARCADE
Name That Moped, Pinball, Blackjack and Stack. Free to play.
Play now