Vintage Rides. Permanent Vacation.
Out in the Wild Merch on Etsy

Moped Wrench Guides · Piaggio Ciao

Piaggio Ciao belt and clutch basics

The Piaggio Ciao is one of the simplest mopeds ever made, but its drive is not the same on every model. Know which setup your bike has before you buy a belt or open the clutch cover.

Jump to a section
  1. Ciao basics
  2. Step one: which drive do you have?
  3. Belts
  4. Replacing the clutch (models without a variator)
  5. Things not to do
  6. Sources
Essential T-Shirt by Moped Motel
Essential T-Shirt by Moped Motel. See the T-Shirts.

Ciao basics

ItemWhat the sources say
Years built1967 to 2006
Engine49 cc, air-cooled two-stroke
DriveBelt drive. Some models have an automatic continuously variable transmission (a variator), others do not
LayoutEngine and drive train are fully enclosed, similar to Piaggio's scooters
IgnitionMagneto, no battery. Models with turn signals add a 6-volt battery for the blinkers
BrakesFront and rear drum brakes
Fuel mixThe plastic fuel cap on newer models doubles as a measuring cup for the 2 percent oil-fuel mix

Step one: which drive do you have?

The Ciao is belt-driven, with some models using a continuously variable transmission. Look at the bike and find out whether it has a variator before you buy a belt, then match parts to the exact model name (P, SC, PX, C24 and so on) rather than just "Ciao".

Belts

Belts are sold by length and width. One European parts listing for a 950 mm variator belt says it fits the Ciao P, SC, PX and C24, measures 12.3 mm wide, and is meant for 90 mm or 100 mm pulleys. The same listing warns that the 12.3 mm width can cause slipping and starting problems and suggests a 13 mm wide belt instead. Treat that as one seller's note: measure your old belt and pulleys, and confirm fitment for your model before ordering.

Replacing the clutch (models without a variator)

iFixit's Ciao clutch guide covers the clutch only. It does not cover the belt. Tools and parts it lists: a replacement clutch, a 5/8 inch spark plug socket wrench, a piston stop, a coin to turn the side-cover pins, and a 17 mm combination wrench.

  1. Put the bike on a stable stand with the engine off and cool.
  2. Turn the three side-cover pins a quarter turn with the coin. Move the pedal arm down to reach the lower pin, then remove the cover on the clutch side.
  3. Remove the spark plug cap and plug. Thread the piston stop into the plug hole by hand to lock the crankshaft.
  4. Loosen the clutch nut counterclockwise with the 17 mm wrench, finish by hand and remove the safety washer.
  5. Take off the washer, clutch shoes, clutch bell and spacer, in that order. Keep them in order.
  6. Fit the new clutch and put everything back in reverse order.

Things not to do

Sources

Related: Which Piaggio Ciao do you have?

Next

More on this bike and what to wear while you work on it:

General information from published sources and owner experience. Your bike, your state and your tools may differ, so check your own service manual and local rules. Moped Motel is an independent fan site, not a repair service. No seller, brand or channel mentioned here paid to be included or asked to be, and we have no affiliation with any of them.

More guides are on the Moped Wrench Guides page, with the sources. Want to meet the riders? See Feature Your Bike.

70cc Moped Kit Fan T-Shirt by Moped MotelMoped Cowboy T-Shirt by Moped Motel

Vacancy for your closet

T-Shirts, hats, and customs. Checkout happens on Etsy.

Moped Motel is vintage two-stroke moped apparel. We print over 100 moped designs on t-shirts, long sleeves, hoodies, sweatshirts, hats and beanies, inspired by real Puch, Tomos and other classic mopeds. Everything is printed to order, and checkout is on Etsy.

// MOPED ARCADE

Think you know your mopeds?

Name That Moped, Pinball, Blackjack and Stack. Free to play.

Play now
Browse merchBuy on Etsy